One Thing at a Time

I wanted to tell everyone a story about a student I (Tim) have been teaching the past few months. Of course, as always, story is to help those who read it…

I have to teach a young man from Edmond, OK for about 2 months now. His father called me in January and asked if I would take a look at his game and determine if I could assist him. This young man (Geoff) is a student at the high school down the road from our course and plays on the golf team (he’s a freshman). The tie I had with his father was I played on a Pro-Am team with him last year in a tournament I play in yearly. He remembered my game and “history” and wanted to know if I could possibly help him. I told him I’d see…

I met Geoff at his golf course and played nine holes with him.

My assessment was as follows:

  1. Pretty good short game – (you guys knew I’d look at that first).
  2. Swing was inside to out with almost no release – reason was very poor balance and body positions would not allow for a good release in his positions.
  3. Because of swing he was hitting weak left shots with almost no distance (Geoff is left handed)
  4. He was having to him mid to long irons to all par fours – his friends his age were outdriving him by 40 yards +++.
  5. His grip was good – his set up – hands too low, head too far forward, weight center (balance) was toward the toes, and very little knee flex because of this.
  6. There were other issues… but most others were minor.

Geoff’s stroke average for the year was 78.5 and best round was 75. So – I told his father we could start working together. I’d do some work with him.

Little history about Geoff –

  1. He has no idea who Moe Norman is.
  2. He has no idea what a single axis swing is.
  3. On his golf team, he plays with many good players including one whose father plays on the PGA tour.

So we started.

The first thing I did with Geoff reviewed the fundamental positions. Geoff had a good grip, so we went to set up. He was leaning way too far forward (toward the ball) on set up. I showed him the correct position, videoed him before and after we made the change to show difference and had him demonstrate to me. He hit about 10 balls the hour lesson – mainly just set up and tried to get comfortable. Then set up again, and again and again and again.. hitting only a couple of shots. I asked him what it felt like, what he saw, etc.. This was the first lesson.

Lesson #2 – I saw Geoff a week later. When I saw him, he was back to his old set up…. (not the one we had worked on). I set him up again in a proper set up (single axis of course) and went through the exact same process of the first lesson – no more.

Lesson #3 – Saw Geoff about 10 days later. He had made great process in the setup. His lead arm was now on his trail, his shoulders were square to the target and his balance was over the balls of his feet – MUCH better than where we started. I checked these positions and had him hit a couple of shots.

Each shot he started from a good set up. So we went on. Geoff’s takeaway was slightly inside and the face of his club was slightly hooded on the backswing. I showed him the proper takeaway and where the club should be at waist high. He repeated that position (probably 200 times) during the lesson – he hit very few balls… I showed him on video, we checked, rechecked, he described the feelings.. etc… Lesson ended.

Lesson #4 – 2 weeks later – Geoff came to the academy. I checked his backswing – was inside and hooded. Showed him the correct position. His quote was he knew where we were supposed to be… I answered “Great – show me”. He showed me correct position in a drill – then when hitting a ball – brought the club inside… I had him drill to correct position again and told him to continue to work on it… that’s it, no more… (To be honest, think Geoff was a little frustrated, but he was starting to get the hint we were not going on until he fixed what we were working on).

Lesson #5 – Week later – Geoff came to the academy. Perfect single axis set up – perfect back swing. Absolutely on plane to the top of his swing… but he was overswinging and his elbow was flying. You should have seen his face when he saw his perfect backswing… Now a dilemma… I knew we needed to shorten up his swing and get his elbow in a much better position (no flying out like Jack Nicklaus). I discussed with his father and we decided to wait – not because he couldn’t handle it, but Geoff had a big tournament the next week and this change was sure to cause a lot of bad scoring (big change and dramatic different feeling in swing). So – I did the next best thing. I discussed where he needed to have his elbow at the top of his swing and why. Geoff understands it was to make sure his elbow was in front of him at impact rather than “trapped” behind him which will happen if the elbow “flies” in the backswing. So we worked on impact with trail elbow in front of him.

Next Week – Geoff’s tournament – Par 70, 30 mph wind, 36 hole Conference tournament.

Geoff shot 70, 69 (1 under) – finished top 5 Hit hit 75% of the fairways and 80% of the greens (yes, he did not putt well……but we haven’t got there yet…)

Reason I tell this story….

As you see – when working with Geoff, I worked on ONE THING and only ONE THING at a time. NO MORE. Not because he couldn’t handle more, but because any golfer who wants to get better has to MASTER one thing at a time, and only ONE thing at a time. If you don’t, you will get nowhere. The entire process will be confusing and misleading. If you progress in this manner – you’ll be amazed how much better you get FAST.

Geoff was an interesting “case” as he didn’t know what I was going to teach next… he hadn’t studied “ahead” as many of those we work with. Not that this is bad (in fact, we think it is great to “read ahead”), but you still must work on one thing at a time. No matter how much you want to skip ahead, it doesn’t work… skipping ahead only causes confusion and problems (big problems) in the swing.

Moral of story:

  1. Get something to study to view the “perfect” model of the swing. Check your swing against this model. You will find the model in the Single Plane Solution DVDs. This is exactly why we produced this instructional material. If you haven’t got it yet.. you are missing what we believe is the best single axis Moe Norman golf swing instructional material on the market… if you don’t believe us – ask our alumni and/or those who already have the instruction material. We GUARANTEE 100%.
  2. Get someone to look at your swing. You can video your own swing (view yourself), send it to us for comments, etc.. or see us or another instructor in person.
  3. Take ONE thing at a time. No matter how good a student you are, you can only work on and master one thing at a time. Some will master faster, some slower… but if you do one thing at a time – you will master the fundamental positions.
  4. Check your swing often and know the model well enough that you know when you have “mastered” a position. You will, you’ll be surprised how fast you can do this and be even more surprised how mastering just one thing will dramatically improve your swing.
  5. Don’t put a time frame on fixing your swing. Some positions will come faster than others, but they will come with time.
  6. GET OUT OF YOUR OWN WAY – as Moe always said….. Good Luck – Remember – Always practice with a purpose.

One thought to “One Thing at a Time”

Leave a Reply to Caroline Cancel reply

Your email address will not be published.